Vocational Skills — CNC & Precision Manufacturing · Admissions open · One-Day Trial available
G-code, M-code & CNC Programme Debugging
Trace modal states, compare controller dialects and identify units, positioning, offset and sequence errors in offline programme exercises.
₹2,499 · full-course fee · 12 months access
Course resources and admissions help
Admissions are open. Review the published course fee and access period, then request admission assistance. A One-Day Free Trial provides 24-hour protected access. Current secure online payment availability is shown at course checkout.
What you get
- G-code grammar, controller identity and offline study boundaries
- Block-by-block modal-state and coordinate tracing
- Unit, diameter/radius and feed-mode debugging
- Arc geometry, plane selection and centre conventions
- Work offsets, tool references and compensation defects
- Canned cycles, subprogram contracts and repetition counts
Eight self-paced written lessons in English, original worked examples, paper or digital exercises, explained knowledge checks and a capstone with a model solution and self-assessment rubric. Automated Course Tutor support is available in the LMS.
The AI Course Tutor is an automated service, not a live teacher.
Who it is for
- Basic familiarity with CNC turning or milling and reading a coordinate table.
- Use the supplied fictional parts and data. Do not upload confidential employer drawings. Use only software you are entitled to use; paper alternatives are available.
Review the sample and available lessons, then use the one-day trial to check the level and teaching format before you pay.
Cost and duration
₹2,499
One-time full-course fee · 12 months course access
Suggested study time: 14–20 suggested study hours; 12 months access
One payment for the stated access period.
Would you like help choosing this course?
Ask about the syllabus, available lessons, trial or admission process. Your enquiry keeps this programme selected.
Choose your preferred response channel when you enquire. In-person or live-class availability must be confirmed separately.
Who stands behind this course
Founded and academically directed by Dr. Saurabh Kapoor, Advocate practising before the Supreme Court of India and the Delhi High Court; LL.M. Faculty and academic responsibility
Not sure where to begin? See the admission pathway from free trial to full programme.
Try a relevant sample first
Read a short category exercise with a worked example and answer. Use the programme-specific trial to explore the actual available course lessons.
Open the free sampleIf the course fits your goal: ₹2,499 full-course fee · 12 months course access.
Explore the available lessons during the 24-hour trial before deciding to enrol.
Academic information
Founder and flagship legal academic direction: Dr. Saurabh Kapoor, Advocate, LL.M. This does not establish specialist authorship or human review of every subject. Where no named subject reviewer or review date is published, that review is not verified.
4 modules · 8 published readings. Index checked: 3/11/2026. This is a publication check, not an academic-review date.
The Course Tutor is automated. Human marking, live classes and individual feedback are not included unless expressly listed in your programme terms. Check the reading index against your syllabus.
Faculty and academic responsibilityYour course catalogue · Vocational Skills — CNC & Precision Manufacturing
Explore G-code, M-code & CNC Programme Debugging
Eight written lessons teaching controller-specific code literacy, modal-state tracing, units, arcs, offsets, cycles, subprograms and a final offline fault-review dossier. Not machine operation or a universal controller reference; no equipment, licence, live teaching, human marking or manufacturer certification included. Eight self-paced written lessons in English, original worked examples, paper or digital exercises, explained knowledge checks and a capstone with a model solution and self-assessment rubric. Automated Course Tutor support is available in the LMS. Online theory and planning only. Physical machine practice requires separate qualified supervision and machine-specific authorisation. No machine time, software or simulator licence, live instructor, recorded lecture series, individual human marking, employment guarantee, ITI/DGT/NSQF qualification or manufacturer accreditation is included. Programme examples are for offline interpretation or simulation and are not ready-to-run machine instructions. Programming concepts overlap Turning and Milling, with deeper comparative debugging exercises here. Related purchases are optional.
- Full-course fee
- ₹2,499
- Course access
- 12 months
- Suggested study duration
- 14–20 suggested study hours; 12 months access
Eight self-paced written lessons in English, original worked examples, paper or digital exercises, explained knowledge checks and a capstone with a model solution and self-assessment rubric. Automated Course Tutor support is available in the LMS.. Study duration and access validity are different; current payment options are shown at checkout.
Course suitability and AI explanation
Is this course right for you?
- Basic familiarity with CNC turning or milling and reading a coordinate table.
- Use the supplied fictional parts and data. Do not upload confidential employer drawings. Use only software you are entitled to use; paper alternatives are available.
Why consider this programme?
Choose it when the topics below match a specific gap in your preparation or learning. A structured route can help you organise study, revisit difficult ideas and build a consistent revision habit.
Compare the reading index with your goal, current level and syllabus. If you need live classes, a recognised qualification or supervised practical training, confirm those requirements separately with Admissions.
Explore the 1-day trialInside the course: topics and features
These highlights come from this programme’s published description. Use the reading index to check the material currently available.
G-code grammar, controller identity and offline study boundaries
Block-by-block modal-state and coordinate tracing
Unit, diameter/radius and feed-mode debugging
Arc geometry, plane selection and centre conventions
Work offsets, tool references and compensation defects
Canned cycles, subprogram contracts and repetition counts
Controlled debugging, evidence and regression checks
Capstone: faulty-programme review dossier
Study roadmap and online learning guidance
A suggested method for working through G-code, M-code & CNC Programme Debugging. Move at a pace that lets you understand and practise.
- STEP 1
Understand
Read the course topics and available explanations. Identify the concepts you need to strengthen.
- STEP 2
Connect
Build your own notes and relate ideas to the worked examples available in the course.
- STEP 3
Apply
Attempt available exercises without looking at the answer first. Record what you can explain independently.
- STEP 4
Revise
Review mistakes, revisit difficult readings and check your progress against your learning goal.
How online study can help you
Fit study around your day
Plan short study sessions around work, college or family commitments. A regular weekly routine still matters.
Revisit difficult concepts
Return to available readings and worked examples during your access period, instead of relying on one classroom explanation.
Learn without a daily commute
Study from a suitable location with an internet connection and compatible device. Practical or clinical requirements, where applicable, remain separate.
Turn reading into active revision
Make notes, attempt the available exercises and use the Course Tutor to explore questions. AI guidance can make mistakes; verify important answers.
Check available readings before you enrol
4 modules · 8 published readings in the last available index. Publication counts do not certify academic completeness.
- Code literacy and state · 2 readings
- Units and geometry · 2 readings
- References and repeated logic · 2 readings
- Controlled review and assessment · 2 readings
These are published programme highlights, not certification of complete syllabus coverage. Review the available reading index and trial before enrolling. ZELVU learning support does not award the underlying degree, professional registration or guaranteed result.
Suggested study duration
14–20 suggested study hours; 12 months access
LMS access
12 months course access
Delivery
Eight self-paced written lessons in English, original worked examples, paper or digital exercises, explained knowledge checks and a capstone with a model solution and self-assessment rubric. Automated Course Tutor support is available in the LMS.
Payment availability
Check current checkout optionsPayment is confirmed only after bank verification.
Review the published learning format and access period before enrolling. Checkout shows current payment availability; a pending attempt is not confirmation of payment or course access.
See syllabus and full reading index
Reading material available in the LMS
Compare the published modules with your examination or board syllabus before you enrol. Reading counts alone do not establish full syllabus coverage. Full lesson text is available in the protected LMS through your eligible trial or course access.
View published modules and readings
8 published readings across 4 modules.
1. Code literacy and state (2 readings)
- G-code grammar, controller identity and offline study boundaries
- Block-by-block modal-state and coordinate tracing
2. Units and geometry (2 readings)
- Unit, diameter/radius and feed-mode debugging
- Arc geometry, plane selection and centre conventions
3. References and repeated logic (2 readings)
- Work offsets, tool references and compensation defects
- Canned cycles, subprogram contracts and repetition counts
4. Controlled review and assessment (2 readings)
- Controlled debugging, evidence and regression checks
- Capstone: faulty-programme review dossier
This index shows available reading material. It does not certify complete coverage of every university, board or examination syllabus.
Detailed programme scope and suitability
What you will study
Eight written lessons teaching controller-specific code literacy, modal-state tracing, units, arcs, offsets, cycles, subprograms and a final offline fault-review dossier. Not machine operation or a universal controller reference; no equipment, licence, live teaching, human marking or manufacturer certification included. Eight self-paced written lessons in English, original worked examples, paper or digital exercises, explained knowledge checks and a capstone with a model solution and self-assessment rubric. Automated Course Tutor support is available in the LMS. Online theory and planning only. Physical machine practice requires separate qualified supervision and machine-specific authorisation. No machine time, software or simulator licence, live instructor, recorded lecture series, individual human marking, employment guarantee, ITI/DGT/NSQF qualification or manufacturer accreditation is included. Programme examples are for offline interpretation or simulation and are not ready-to-run machine instructions. Programming concepts overlap Turning and Milling, with deeper comparative debugging exercises here. Related purchases are optional.
- G-code grammar, controller identity and offline study boundaries
- Block-by-block modal-state and coordinate tracing
- Unit, diameter/radius and feed-mode debugging
- Arc geometry, plane selection and centre conventions
- Work offsets, tool references and compensation defects
- Canned cycles, subprogram contracts and repetition counts
- Controlled debugging, evidence and regression checks
- Capstone: faulty-programme review dossier
Is this programme for you?
- Basic familiarity with CNC turning or milling and reading a coordinate table.
- Use the supplied fictional parts and data. Do not upload confidential employer drawings. Use only software you are entitled to use; paper alternatives are available.
Review eligibility, learning scope and the current examination requirements before committing. Academic and professional-examination support does not itself award the underlying degree or professional registration.
Admission assistanceInside this programme
How learning works in G-code, M-code & CNC Programme Debugging
Eight self-paced written lessons in English, original worked examples, paper or digital exercises, explained knowledge checks and a capstone with a model solution and self-assessment rubric. Automated Course Tutor support is available in the LMS.. Study the material available for this programme in the student LMS. Features and assessments vary by course; check what is included before enrolling.
- 01
Follow the course outline
Start with the published modules for G-code, M-code & CNC Programme Debugging. Read the lesson explanations and worked examples in sequence.
- 02
Ask the Course Tutor
Where available, ask for an explanation, comparison or revision of the lesson you are reading. The AI Course Tutor is an automated service, not a live faculty member, and can make mistakes.
- 03
Use available learning tools
Use the narration, visuals or videos provided in the course player. A programme introduction is not a promise of a video lecture for every lesson.
- 04
Practise and revise
Complete the published exercises and knowledge checks, review mistakes and revisit the relevant lessons. Check the programme’s published assessment and support details; the standard delivery is self-paced.
Admissions for this programme
Before you enrol in G-code, M-code & CNC Programme Debugging
Review the curriculum and eligibility above, explore the available learning experience, then confirm this programme’s fee and access period.
12 months course access
The one-time full-course fee is shown once, at the top of this page.
Can I try this programme?
Use this programme’s trial link below. Eligible access lasts 24 hours for one selected programme, with one trial per account. A parent or guardian should manage a school learner’s account.
What does the fee cover?
New Education admissions use a one-time full-course fee for the stated access period, not a monthly course subscription. Historical purchases retain their original terms.
When is admission confirmed?
Resolve programme questions with Admissions, review the current checkout options and read the terms and refund policy. A payment attempt or pending payment does not confirm admission. Paid access requires verified payment and the applicable programme checks.
Does this award a degree or guarantee selection?
This is learning or examination-preparation support. The underlying degree, professional registration, eligibility and examination rules are governed by the relevant institution or examining authority. Selection, rank and passing are not guaranteed.
Career preparation alongside this subject
Use your learning in G-code, M-code & CNC Programme Debugging to build an honest evidence portfolio. Suggested practice: a fictional service record or supervised skills log. Practical competence, safety training and licences require appropriate authorised assessment.
Optional starting pathway: Vocational, ITI & Non-Degree Job Readiness. This is a separately priced preparation course; employer referrals and job placement are not included.
Compare career pathways and free resourcesCourse questions answered
What will I study in G-code, M-code & CNC Programme Debugging?
G-code, M-code & CNC Programme Debugging: Eight written lessons teaching controller-specific code literacy, modal-state tracing, units, arcs, offsets, cycles, subprograms and a final offline fault-review dossier. Not machine operation or a universal controller reference; no equipment, licence, live teaching, human marking or manufacturer certification included. Eight self-paced written lessons in English, original worked examples, paper or digital exercises, explained knowledge checks and a capstone with a model solution and self-assessment rubric. Automated Course Tutor support is available in the LMS. Online theory and planning only. Physical machine practice requires separate qualified supervision and machine-specific authorisation. No machine time, software or simulator licence, live instructor, recorded lecture series, individual human marking, employment guarantee, ITI/DGT/NSQF qualification or manufacturer accreditation is included. Programme examples are for offline interpretation or simulation and are not ready-to-run machine instructions. Programming concepts overlap Turning and Milling, with deeper comparative debugging exercises here. Related purchases are optional.
What is the full-course fee and how long does access last?
The one-time full-course fee for G-code, M-code & CNC Programme Debugging is shown at the top of this programme page, with 12 months of course access. Review the current checkout and refund terms before paying. Access time is separate from any degree duration or examination schedule.
How is the course delivered, and can I try it first?
G-code, M-code & CNC Programme Debugging is offered by ZELVU Education. Delivery: Eight self-paced written lessons in English, original worked examples, paper or digital exercises, explained knowledge checks and a capstone with a model solution and self-assessment rubric. Automated Course Tutor support is available in the LMS. An eligible 1-Day Free Trial provides 24-hour protected access to explore the available material. The Course Tutor is automated. Review the published reading index and course scope before enrolling.
Who should consider this programme?
G-code, M-code & CNC Programme Debugging: Basic familiarity with CNC turning or milling and reading a coordinate table. Use the supplied fictional parts and data. Do not upload confidential employer drawings. Use only software you are entitled to use; paper alternatives are available. Confirm current prerequisites with the relevant institution or examining authority. Learning support does not itself award a degree, professional registration, admission, employment or an examination result.
Check the terms and refund policy, or ask admissions about course fit.